Altitude and azimuth bearing laminate and Teflon
Azimuth bearing bolt assembly
Rocker box setting circle inscirbed boards

ATM Order Shipping Costs:
We will send a separate PayPal shipping invoice after receipt of your order. Inquire for non-US/Canadian destination costs.

  • Laminate rings to 23.5": $16 U.S., $30 Canada. Can include Teflon pads. Add $5 to include: laminate strips, azimuth bolt assembly kit.
  • Laminate rings to 19.5": $10 U.S., $25 Canada. Can include Teflon pads. Add $5 to include: laminate strips, azimuth bolt assembly kit.
  • Laminate rounds: $10 U.S., $15 Canada. Can include Teflon pads. Add $5 to include: laminate strips azimuth bolt assembly kit.
  • Laminate strips: $10.00 U.S, $15 Canada. Teflon pads and azimuth bearing assembly can be included at no extra shipping cost.
  • Azimuth Bolt Assembly Kit: $5 U.S., $10 Canada. Teflon pads can be included at no extra shipping cost.
  • Teflon pads: Free U.S. shipping, $5 Canada.
  • Setting circle rocker box boards: Shipping costs vary by destination, please inquire.

Laminate ring on bottom of mount.


 Example of 1.5" ring thickness.

Black Formica laminate Crystal 42

Custom Size Laser Cut Azimuth Bearing Rings.
Prices are for ring widths up to 23.5" and thickness up to 1.5".
Ring thickness example below image at left.
Wider and/or thicker rings upon request.
Check our precut ring specials here.

Maximum outside diameter
Outside diameter desired.
Ring thickness up to 1.5"

 

Laminate Rounds: $20.
Included shipping within US.

Available from 8" to 15" - sizes constantly vary.
We will e-mail size closest to your minimum before processing order.
Minimum diameter:


Altitude Bearing Laminate 48" Strip pairs.
Black Formica laminate Crystal 42
Sold in pairs.

Width


 

Virgin Teflon (PTFE) Pads.

Predrilled and countersunk with #6 flathead screws included.

0.75"x1.00" Altitude pads.
1.00"x1.00" Altitude pads.
1.25"x1.25" Azimuth pads.

Azimuth pads ordered with Azimuth Laminate Bearing Ring:
Pads can be sized to match width of azimuth ring up to 1.5".

Sizes:

Azimuth Bolt Assembly Kits: $15.

Rocker box parts:
3/8-16 stainless steel bolt (various sizes available).
3/8" ID flanged bearing sleeve (fits 1/2" hole.

Ground board parts:
3/8" weld nut (fits 7/16" hole, t-nut shown is discontinued).
Three 1/8" screws to secure weld nut.
3/8" nylock.
 
Bolt length:
Click to enlarge image.

ATM Rocker Box Setting Circle Board.
Just pair with an altimeter (examples).

CNC cut 0.75" thick birch plywood, cut to your size up to 23.5" diameter
Setting circle is laser etched. Comes sanded with 80 grit..
Can drill screw holes and center hole per your dimensions.

Specify board outside diameter wanted.